doesn't make much sense to replace an r/r until you test stator ac output FIRST. as always with charging issues, inspect the red plug on top of...
the same mitsubishi pump was used by all the japanese manufacturers on dozens of models of carbed bikes over 20 years, so finding one in a salvage...
still virus-free
just wondering why no rear brake line through swingarm mod ? it tidys things up alot, as you know.
do some research here on the various potential problems of VF500 engines (especially the valves) and difficulty of finding replacement parts.
yes, all butterflies should be able to close completely. as capt80's says, use idle adjusting screw to set the minimum opening (with feeler...
i've had good luck by removing the mc from the bar and holding it vertically, suspended from the lever while tapping the line to jiggle bubbles up...
why don't YOU hook us up with what VFR parts he has ?? or ask him to list his stuff here ?
^^ ok we need to work together to get this one running well. :D
as mentioned, if one starts and runs and you have good pictures, lower your price a bit and see what happens. when i was trying to sell my...
run in the opposite direction, fast !
judging by the synch gauges, i think you might have lost a synch spring on the throttle linkages. also, i think you're going the wrong direction...
that's why i only ride older bikes, no payments.
^^ agreed. chain must be set for proper tension at the tightest spot (while turning the wheel) , and if it then has excessive looseness at other...
it may be time to pull the carbs off and do a traditional, old-fashioned eyeball synch referencing throttle plates and the first progression hole.
043_43_vtrhouseca1 by squirrelman posted Dec 10, 2008 at 2:20 AM
not necessarily a bad r/r, but if the melted wires touch it will kill the stator.
after draining float bowls you can try blowing some air into the main fuel line feeding carbs, just might dislodge some debris on float needle or...
watch out for starting fluid as it can destroy slide diaphragms and has other ill effects.
[ATTACH] Freshly cleaned, adjusted and leak-tested, new fuel tube o-rings and float bowl gaskets, GUARANTEED to work great. $420+20 postage...
Separate names with a comma.
