Racetech normally specify 15mm of preload with their springs. Do this before you add the oil. Assemble your fork, extend it fully. Drop in the...
That's just what happened to my old RF900 that I sold in mint condition. Turned up a year later on our local auction site having been stolen,...
I've bought two seat covers for my VTR1000 and ST1100 from these nice folks in Poland. Plenty of customising options for colours, and they look...
I have got an Angel GT on the front of my ST1100, and this is an impressively trustworthy tyre. Has a dual compound so the centre should provide...
Have a look at this thread: http://www.vfrdiscussion.com/index.php?/forums/topic/34394-6th-gen-blue-connector-ground-fix-how-to/&page=3
The tube I use has an id of about 5mm. Other tasks that one should avoid with one's wife include wallpapering, putting up a tent on a windy day...
Get a couple of feet of clear plastic tubing that is a snug fit on the bleed nipple. Put a ring spanner on the nipple then fit the tube. Put the...
I'd suggest the most likely thing is you have air in the clutch line that needs to be purged out. When you work the lever, can you feel the...
Just another 1000 mile weekend eh?? Good for you.
I hope so too. The temp sensor reads higher with lower resistance, so if you have a chafed wire that allows some grounding to occur you'd get a...
I think your neutral light cut out is unrelated, but probably you just need a new neutral switch, should be a screw out/screw in job. The...
Actually, a higher temp corresponds to a lower resistance, so corrosion would make the gauge read low, not high. [IMG] Maybe getting into a...
Good lad. Those are fetching some crazy $$ these days as the customising crowd has grabbed on to them. The CX was my first real big bike test...
Sorry to hear that you're still having troubles Jake. The varying temperature readings sound very odd, as the new thermostat should be controlling...
Can we also beat up the guy that positioned the thermostat in the 5 and 6G? Sent from my iPhone using Tapatalk
Says the man with de-linked brakes.... (which I too have done).
I too use aerosol chain lube, I also have one of those nifty little attachments that cost a few $ and clamp on the end of the cable outer to allow...
Honda went to town on the 86/87 generation of the gear drive VFR700/750 to correct the public perception of failures of the earlier model. As a...
You can try pushing the bar end weight inwards while you turn the screw; if you are lucky the stepped end of the weight will engage with the end...
Congratulation on persevering with this one!
Separate names with a comma.
