Best to bleed slave by removing it from sprocket cover and fully retracting and holding the cylinder in place using a C-clamp. Might also help...
You'll get the most air out of the system by removing the slave from sprocket cover and using a C-clamp to hold it fully retracted while bleeding.
Ring gaps should be spaced 120 degrees apart, but unless you can find the proper oversized pistons and rings to match the overbore you need, your...
With plugs out the engine should require very little effort to turn by hand.
Great bikes until the cams go flat or a rod suddenly shoots out the side.....like what happened to a guy i know here. In fact, i think i enjoy...
Yeah, good luck not crashing.
Squid-in-training ?? Unless he/you/they grew up on dirtbikes, wheelies are foolish, risky examples of irresponsible, juvenile riding and do...
Watch out for any fuel leaks in proximity to those sparking points !!!! You could likely find a used replacement at a breaker's yard cuz...
Before digging any bike out of long-term storage it's best to remove sparkplugs and pour about 1/2 oz of engine oil into each cylinder--which you...
NCB has it covered, but if you can find the idle mixture adjusting screws, you could easily dial in an additional 1/2 to 1 turn counterclockwise...
Learn to ignore peer pressure and feelings of inadequacy. Guys who ride them Bustas are nuts. XX is a big, wide, fat pig, and no one with...
[ATTACH] Loosen clamps on both sides, heat gun softens rubber, work on rears first, useful pry points between carb tops and valve cover....
What would cause a freshly rebuilt Fox shock to spew all its pressure and fluid while sitting on a shelf for about 2 years ??
Sorry, my earlier advice was seriously in error. Please visit my website: www.imightbeanidiot.com
Hazzmatt has it right; there is no comparison between the braking ability of steel-braded lines and old, squishy, expandable OEM lines. You'll...
Sorry, i'm an amateur idiot and gave improper advice.
The idle speed adjusting knob ??? Don't people read the owners manual any more ??
Sure you should buy it !! You'll make the guy so very, very happy to see it leave his driveway.
Sure they differ due to the extra cam pulse generator connection. You probably ( i'm not certain) need the cdi from an '87 to make things work or...
Check plugs for a lean condition and flush and replace old coolant, making sure all air is removed from system.
Separate names with a comma.
