Looks like a great project, Rogue. Ill look forward to the build. The lower fairings are a nice add.
Fronts are out. Rear M/C may be functional so ill see if I can fill/bleed and use it to pop the rear pistons
Cheers Guys, ill give that a try. I managed to get the 4 front pistons to move, hit them with WD40 inside and out, some heat and more WD40. I...
Hi Fellas, a question for you guys re freeing up seized brake Calliper pistons. My Project CB900F, was left in a barn with no brake fluid in it,...
Yes, lovely machines !!
Well, as it happens, I trial fitted the Athena ones and theyre too large in diameter to properly seat in the recessed/machined seats on the case...
PM Sent, thanks !!!
Thanks !! mine measures as follows 0.81 inch (20.9mm) x. 1.62 in (41.3mm)
Hi Chaps, looking for a Honda part for my project, Honda calls it a Bracket Retainer, part number 45112445631. One of mine is MIA. its a little...
One vote OEM, One Vote New Well, I've already Annealed them and sanded the OEM ones, so I have a choice to make I guess, the OEM are .5MM thicker...
Yea, maybe I'll anneal and sand the OEM
So, Im about to put my crank case back together and there are 10 copper washers that go under the bolts that hold the crank shaft & bearings. My...
Takes me about an hour and a half to two hours to strip 8 layers of paint off a tank - one layer at a time. I use a generic hardware store gel...
I just finished stripping the tank on my CBX750. Paint was thicker than a linebacker's neck used a chemical stripper, took off 8 or more layers...
Cheers!
Thanks, yea, ill have to go find some of this special grease, the larger case bolts require it for the correct torque cheers fellas
Hi Chaps, reading the shop manual for my CBX750 and it says for re assembly (not there yet) I need to coat the crankcase bolt threads and flanges...
Here are the latest Vid's from my Youtube channel on the CBX750 Resto CBX Pre Resto Preview: https://youtu.be/HVi0Egw2A1c...
Me too, keep promising myself a welding class
19 now.
Separate names with a comma.
