Somebody's tag is wrong. That is RC24/26 all day long. I'm surprised you couldn't tell just by looking at it and comparing Baz.
Cool 1984 VF500F "Crashed" can have some nuances, but the bike has been down on both sides. The right side event had enough movement/spin to...
6mm flanged. Moved a bike and saw it after it rolled away 4 days ago. [ATTACH]
Bike ran, but didn't idle. You took it apart, which you have done before, and now it doesn't even want to try to start. Fuel line blockage in...
Always loved that bike. That is some sweetness.
Who in the hell are you talking to, and what in the hell are you talking about?
Have you tried priming the carbs with the relay jumped? It should run and then eventually start clicking slowly and stop.
Baz, I have a question about the pic with the cush rubbers. It kinda looks like they are set up to be on just one side of the hub triangular...
Long shock. I have to pay attention to the RC26 too.
If it's in and properly torqued, it's cool. I just prefer to have the nut on the right when tightening, which is stock. Additionally, if you...
Damn. That is a nice, all original, survivor example.
Make sure your rear stand is not adjusted so tight that it is pushing the swingarm together when the rear wheel was removed. You don't have to do...
Yes, that appears to be a problem. In the future, they don't have to come all the way out. A couple turns and fuel will come out of the drain...
They are accessible when mounted. See the nipples on the bottom in the first pic? The drain screws are on the end of "tunnel" shaped feature. 2...
So you've cleaned your own carbs, but you don't know where the carb bowl drains are? There are flat blade screws on the bottom of the float bowls...
It's the responsibility of the buyer to do all of the research regarding shipping a bike. It's yours when it loads onto the truck. FOB Origin....
Have you cracked a carb drain to make sure you are getting gas to the carbs?
Might be worth looking at the MilchKrate 2000 luggage system. Very versatile and available behind many grocery stores. [ATTACH] [ATTACH]
Roll the fork tube in the bearings to check for straightness. You can also mount a magnetic indicator gage to check run-out if needed/wanted.
wd in the hizzy! Let me re-read your post a little later. But sounds like maybe starving for fuel and is a lean condition. But I really don't...
Separate names with a comma.
