So I did a rebuild on this a year ago, hasn't been tested until today. Long story. I followed the Daugherty Motorsports description seemed go...
Mine is an 86. Thanks WD
I have used this stuff on some of my vacuum applications along with this more reasonably priced vacuum grease. As to the grease the little...
All eight are in similar condition. This one I pulled off averages 43mm ID. As close as I could measure very roughly the OD of the insulator is...
I have definitely used all the screw on these. I am going to look for some narrow width (8mm) 30 mm diameter worm drives. I dislike worm drives...
I am not sure what limiting tabs are but here is the culprit. It looks to me like it is meant for a large bore carb, not 30mm.? [ATTACH]
Well this interesting... I can see that when spraying the WD at carbs 1 and 2 that the material is getting sucked into the carb. I was able to...
Good suggestion. BINGO.. Did not solve the issue completely but is better. Smoothed out some when hit 1 and 2 with WD. Put a very small...
Thanks for the picture., I did find a gauge (generic on Amazon for 20 bucks. ) I didn't know how / where to measure until I saw your picture....
Hmmm. That could be. Is there an after market float level gauge that works? Or a home built that works. I am seeing that he OEM honda gauge is...
Yeah I have a history of riding on wooden tires! Mistakes you can recover from when you are young are pretty much out of the question now. Did...
I did and have on the bench as well gotten mist to blow out of holes. I have had to fish out the orings each time. I am certain that they are...
Good information all! Kind of a shame the bike has a BT45R on the rear with little wear. Unfortunately it was manufactured in March of 2002....
Today it is running at the correct idle with no choke 1300 rpm ish. It still bogs down when throttle applied without choke. Smoking I still...
I removed the pilot screws shot the openings with Gumout, blew them out with compressed air, I could hear and feel the air blowing through the...
[ATTACH] This was last week. Buffalo Pass Chuska Mtns. They close this pass on the res. for winter. I rode yesterday in jacket and jeans....
Cool site thanks! I see the Metzeler Roadtec right off, Can anyone provide feedback? I had good experience with Metzeler back in the 80's when...
Cool. Thanks again. So ....Squirrelman , How are you?
Well they are on right now so I will take the air box back off and have a look see. Can I get sufficient material down the throats do you think...
This is done with the carbs back off the bike I am assuming? Or ???
Separate names with a comma.
