Speaking of vacuum, I have noticed that the hoses for my carbs are extremely hard, and one has a split where it slides on to the plastic tubing....
I ordered 50 x 3 mm Viton Orings. at https://www.oringsandmore.com/ For information sake anyone in the Metro Denver area can walk in to...
Plenum orings look like they should be 50 x 3mm? going to see what I can find before I head out on the KLR for morning stroll here in Colorado...
Nope. I assume there is supposed to be something there hence the ring grooves/lans? I will attempt to figure out what size to order. Had...
did not have any orings at the air box to intake lans when I took it apart. Sizes if required? they look like they should have been pretty fat?
The washer still stops at the collar. It kind of sits in a little groove between the oring and the end of the tube. It is nearly impossible to...
Oh Capt 80's wanted to say special thanks for the tip and link for orings. I re-assembled number 1 yesterday and the 73mm bowl ring was...
[ATTACH] [ATTACH] The images are of the transfer tube between 1 and 2. I lost one of the really thin rings that you see on the first image. It...
Yuh, the slides come pretty clean, but I haven't gotten to number 3 yet, the bad one. I did separate the mains from the holders on 1, and 2....
[ATTACH] Acknowledged. Check out the black tar on the slow and main holder. I have them bubbling in an ultra-sonic bath right now. I got...
I am back home and hoping to get into the carbs again. Got some .25 mm wire to push through the enrichment valve. I will break down 2-4 and do...
Found and ultrasonic degreaser, nothing fancy but functioning well.. Lots of gunk came out of Main holder and slow jet. Enrichment valve area is...
On carb one I removed the Main jet holder and the Slow jet and ran the smallest wire I had into the Enrichment tube. All things were gummy! Very...
So bout to get into to tonights carb exercises. Wanted to ask if there was any reason to remove the needles from the slides? I was able to get...
I'm good I appreciate the effort you put into this.
Cool. I can do that. I have a set of calibrated wire gages. And just to confirm carbs are numbered (Sitting On Bike Looking Down) from left...
Thats the one.
After inspecting them they cleaned up really well. They had a lot of varnish on them when first dissassembled.
On a side note to you have pictures of any of your bikes posted anywhere?
It must take a pretty thin walled socket to get at the float seat. I tried one of mine last night and the walls of the socket prohibited the...
Separate names with a comma.
